R.J. Noble Company has two Asphalt Batch Plants.  One is located at 15505 E. Lincoln Ave in the City of Orange; the other is located at 25225 Maitri Rd. in the City of Corona. 

Our asphalt plants make asphalt in 4-ton batches that are mixed in a pug mill.  Aggregate feed from cold feed silos is put through dryer were moisture is taken out of the aggregate and the aggregate is heated to the proper mix temperature.  After the aggregate is finished with the heating process it dropped onto a screening deck were the aggregate is screened into the proper sized aggregate bins.  Aggregate bins are sized from ¾ inch down to ¼ inch.  The material in the bins is weighed into the proper proportions then is dropped into the pug mill where it is mixed with asphalt oil. 

After the material is thoroughly mixed it is dropped onto a truck to be transported to the job.  This process allows our plants to switch between mixes with relative ease.  R.J. Noble produces a wide variety of asphalt mixes.  From Temporary Asphalt to Polymer Modified Asphalt and in sizes from ¾ inch to ¼ inch.  We are dedicated to producing quality long lasting asphalt every day.

R.J. Noble Company's asphalt plants utilize state-of-the-art emissions control equipment. Among these are Blue Smoke controls, where the captured air is circulated through an elaborate filtraton system, which reduces hydrocarbons in the air. The plants also have modern, low-emission natural gas burners.

The Orange Plant is one of the few aphalt plants in Southern California to have a South Coast Air Quality Management District approved ACEMS System. This system and method of continual emission monitoring helps keep our environment clean. [ The Orange Plant »

link to corona plant...